topic WLC 2504 Migration Path in Wireless

WLC 2504 Migration Path

Alejandro.Angon — Sun, 04 Jul 2021 07:02:30 GMT

Hi,

I have a WLC 2504 and I need to upgrade it from 7.0.116.0 to 7.3.112.0 software version. I sow at the 7.1.91.0 release download page an advertisement that says "Migration path is from 7.1 to 7.2 Release" so I would like to know if I need to upgrade from 7.0 to 7.1 and after to 7.3 release code or if it´s posible to do it directly from 7.0 to 7.3

thanks a lot for your help

WLC 2504 Migration Path

Leo Laohoo — Wed, 08 May 2013 00:26:30 GMT

Yes you can upgrade direct from 7.0.98.X.

WLC 2504 Migration Path

Alejandro.Angon — Wed, 08 May 2013 03:32:42 GMT

hi leolaohoo,

do you know any reference about this?, I need to be very sure of the procedure because the WLC service is critical

thanks a lot for your help.

WLC 2504 Migration Path

Leo Laohoo — Wed, 08 May 2013 03:39:00 GMT

Table 4: Upgrading to Controller Software Release 7.4.100.0

WLC 2504 Migration Path

Saurav Lodh — Wed, 08 May 2013 08:28:50 GMT

You can migrate that way. Please see the image

WLC 2504 Migration Path

Alejandro.Angon — Fri, 10 May 2013 15:06:23 GMT

Hi,

I have just upgraded the WLC directly form 7.0.116.0 to 7.3.112.0 without any problem. I have many flexconnect APs and I didn´t lose any VLAN mapping as it would happend triying to upgrade to 7.4.100.0

http://www.cisco.com/en/US/partner/docs/wireless/controller/release/notes/crn7_3_112_0.html#wp1057104

best regards

WLC 2504 Migration Path

asadmtz01 — Tue, 04 Mar 2014 07:17:33 GMT

can we limit bandwidth on wlc 2504.?

Re: WLC 2504 Migration Path

Sandeep Choudhary — Tue, 04 Mar 2014 07:27:35 GMT

No you can not , on 5508 model you can.

Regards

Sent from Cisco Technical Support iPhone App

WLC 2504 Migration Path

Leo Laohoo — Tue, 04 Mar 2014 07:28:25 GMT

can we limit bandwidth on wlc 2504.?

Depending on what firmware you are using you can limit bandwidth in two ways:

1. Limit bandwidth on SSID; or

2. Limit bandwidth per user.

WLC 2504 Migration Path

Sandeep Choudhary — Tue, 04 Mar 2014 08:18:40 GMT

The WLC2504 does not support per-user or per-WLAN QoS. Only the 5508 and up support those features.

Regards

Dont forget to rate helpful posts

WLC 2504 Migration Path

asadmtz01 — Wed, 05 Mar 2014 05:29:38 GMT

and what about per interface. bandwidth limit.?

Re: WLC 2504 Migration Path

Sandeep Choudhary — Wed, 05 Mar 2014 06:48:48 GMT

Not supported on 2504 WLC.

Regards
Don't forget to rate helpful posts

Sent from Cisco Technical Support iPhone App