topic WLC and windows radius issue and another problem in Wireless

WLC and windows radius issue and another problem

Waldo Roca Martin — Sun, 04 Jul 2021 05:28:56 GMT

Hi everyone.

We have a problem with a costumer wireless infraestructure which has a WLC using a Windows 2003 radius server. for authentication.

The users can't connet to the SSID from monday. Anything haven't been changed and the configuration is correct.

I think its a client problem because the clients who use Linux can connect.

Any idea?

I have attached a debug dot1x events when a windows client try to connect.

We have another problem with another SSID using local wpa2/pkm/ascii authentication..

This SSID is used for smartphones. The clientes who use Android can connet, the clients who use IPhone can't.

Is this a cospiracy? xD

Thank you for avance.

Best regards

Stephen Rodriguez — Wed, 01 Aug 2012 15:24:04 GMT

for the debug you attached, I see the client send an EAPOL start message, after it gets the Identity request. It seems to move beyond that, and then

Jul 30 15:36:47.396: 18:3d:a2:65:bd:54 Processing Access-Reject for mobile 18:3d:a2:65:bd:54

I'd take a look at the IAS logs to see why this particular client was rejected.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

Waldo Roca Martin — Thu, 02 Aug 2012 09:15:24 GMT

Thank you for the answer

This happend to any client.

I'm not familiar with IAS, do you know where can I check the IAS logs?

Thank you.

Best Regards

Stephen Rodriguez — Thu, 02 Aug 2012 09:32:09 GMT

If I recall correctly it should be the system log. You'll see messages marked IAS.

Steve

Sent from Cisco Technical Support iPhone App