topic Help! AP 1262 cannot Join Cisco WLC 4402 in Wireless

Help! AP 1262 cannot Join Cisco WLC 4402

kellyezekwe — Sun, 04 Jul 2021 05:16:15 GMT

We have two cisco 1262 AP and a 4402 WLC, the AP cannot join the WLC.

The AP gets the address from dchp

I cannot ping the AP address from the WLC, but i can ping the default gateway and other VLAN addresses.

I already read the info on the this link :

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

Still our AP cannot join the WLC no matter what i have tried.

Can anyone help with this problem?

Setup

- VLAN setup on a Cisco 3560 48 port poe Switch

- tunk configured btwn the Gi Interface and the Management physical port

- WLC mode is configured for Layer 3

- AP Manager and Management are in the same Subnet

- Option 43 is configured for the with the AP Manager's IP address

- Opotion 60 is also configured with AP Manager's IP address

- the port connected to the APs are in the AP Manager VLAN

Please help.

Thanks!

Help! AP 1262 cannot Join Cisco WLC 4402

Leo Laohoo — Fri, 08 Jun 2012 01:48:49 GMT

Duplicate post.

Help! AP 1262 cannot Join Cisco WLC 4402

kellyezekwe — Fri, 08 Jun 2012 15:58:55 GMT

AP2c54.2d9e.02de>sho inventory
AP2c54.2d9e.02de>sho ver
Cisco IOS Software, C1260 Software (AP3G1-RCVK9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 15:02 by prod_rel_team

ROM: Bootstrap program is C1260 boot loader
BOOTLDR: C1260 Boot Loader (AP3G1-BOOT-M) Version 12.4(23c)JA, RELEASE SOFTWARE (fc3)

AP2c54.2d9e.02de uptime is 30 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g1-rcvk9w8-mx/ap3g1-rcvk9w8-mx"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1262N-N-K9 (PowerPC460exr) processor (revision A0) with 81910K/49152K bytes of memory.
Processor board ID FTX1616E48X
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
LWAPP image version 7.0.112.74
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 2C:54:2D:9E:02:DE
Part Number                          : 73-12175-05
PCA Assembly Number                  : 800-32268-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC16140D19
Top Assembly Part Number             : 800-33866-01
Top Assembly Serial Number           : FTX1616E48X
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1262N-N-K9

Configuration register is 0xF

AP2c54.2d9e.02de>

Help! AP 1262 cannot Join Cisco WLC 4402

Saravanan Lakshmanan — Fri, 08 Jun 2012 17:47:16 GMT

1260 AP supported from 7.0.116.0 WLC code.