topic LAP Name ip address can't change on WLC in Wireless

LAP Name ip address can't change on WLC

zhou359004756 — Sun, 04 Jul 2021 04:47:45 GMT

When I change LAP name and IP address on WLC ,It warns said Controller name is mandatory when controller IP is configured,please tell me

how To Operate??

Thinks

LAP Name ip address can't change on WLC

Leo Laohoo — Thu, 15 Mar 2012 04:03:49 GMT

What is the version of your controller? I've never seen this error message before.

LAP Name ip address can't change on WLC

zhou359004756 — Thu, 15 Mar 2012 05:20:41 GMT

5508 WLC version 7.0.116

LAP Name ip address can't change on WLC

weterry — Thu, 15 Mar 2012 17:30:24 GMT

The error message is referring to the High Availbility tab on the AP configuration. You likely have an IP address in the Primary/Secondary/Tertiary field without actually having a Controller Name. For High Availability, the IP is optional but the name is a requirement.

When you hit APPLY there is a config check on the GUI seeing this mismatch in configuration and is warning you that it can't apply the configuration because you are missing the WLC name. solution would be to remove the IP address from High Availability or to properly configure it with WLC names.

At least that is what I believe is happening.....

LAP Name ip address can't change on WLC

zhou359004756 — Wed, 21 Mar 2012 05:24:48 GMT

Think you

LAP Name ip address can't change on WLC

Andy_Edward_2 — Thu, 01 Aug 2013 09:10:25 GMT

This ^ above worked a treat! Thankyou...

LAP Name ip address can't change on WLC

Vinay Sharma — Sat, 31 Aug 2013 13:08:22 GMT

Thanks Wesley for providing this useful information 5+ :-).

This information is captured in the following document:

LAP Name ip address can't change on WLC

Regards,

Vinay Sharma

Community Manager