topic high availability on wlc in Wireless

high availability on wlc

jzegarralajo — Sun, 04 Jul 2021 04:24:59 GMT

I have 2 WLC (5508), i configured the option for enable the high availability, but when the 2 WLC is working the mesh network is unstable, when only wlc is working the mesh is fine.

high availability on wlc

Scott Fella — Sat, 21 Jan 2012 17:09:53 GMT

Just to clarify... you setup high availabiliity on each of the rap/map and pointed that to wlc#1 and secondary to wlc#2? Makes ure you do not have master controller mode enabled and when you say unstable, is it wlc#1 or wlc#2?

high availability on wlc

jzegarralajo — Sun, 22 Jan 2012 07:01:39 GMT

Yes, i configured on each map/rap the ip address of primary and secondary controller.
I configured only on the primary controller the option Master Controller, too into the WLC1 (primary) joined the ip adress of the controller second in the optinon **Back-Up primary controller ip address** in the tab High dispobility, and similary in the second controller (I put the ip address the primary controller).

The network is unstable only when the both controllersare in power on, the clients no reachable the server.

Re: high availability on wlc

jzegarralajo — Sun, 22 Jan 2012 07:06:28 GMT

Yes, i configured on each map/rap the ip address of primary and secondary controller.
I configured only on the primary controller the option Master Controller, too into the WLC1 (primary) joined the ip adress of the controller second in the optinon Back-Up primary controller ip address in the tab High dispobility, and similary in the second controller (I put the ip address the primary controller).

The network is unstable only when the both controllersare in power on, the clients no reachable the server.