topic Re: RF Grouping problem WLC 5508 in Wireless

RF Grouping problem WLC 5508

tsakoulias — Sun, 04 Jul 2021 02:40:19 GMT

Hi,

We have a problem regarding RF Grouping between two WLC 5508.
The two controllers have the same RF Group name,RF Grouping is enabled,they belong to the same mobility group,their management IP
address is on the same subnet, they ping each other but they don't elect a Group Leader. Each one
elects itself as the Group Leader.
We have tried to place 2 APs,each belonging to different controller, close one to the other but nothing changed.

Any help would be much appreciated.

Re: RF Grouping problem WLC 5508

Nicolas Darchis — Fri, 14 Jan 2011 10:16:38 GMT

Please post the 2 "show run-config" of the WLCs and let us know which APs are close to each other.

Nicolas

Re: RF Grouping problem WLC 5508

tsakoulias — Fri, 14 Jan 2011 11:23:20 GMT

Hi Nicolas,

Because we have an almost live network, we wouldn't like to go public with our configurations. Is there any other way we can send them to you?

Thanks in advance,

Theofilos

Re: RF Grouping problem WLC 5508

Nicolas Darchis — Fri, 14 Jan 2011 13:17:09 GMT

That is called opening a TAC case. That's why the service is there 😉

Nicolas

Re: RF Grouping problem WLC 5508

tsakoulias — Sun, 16 Jan 2011 09:31:29 GMT

Thanks for your response.

Best Regards,

Theofilos

Re: RF Grouping problem WLC 5508

craig.eyre — Thu, 15 Sep 2011 19:41:34 GMT

Theofilos,

Did you figure out what the issue was regarding rf grouping?

thx

Craig

Re: RF Grouping problem WLC 5508

George Stefanick — Thu, 15 Sep 2011 20:29:18 GMT

I had a similar problem once before. After I rebooted the WLCs all was well. Have you tried that by chnace?