Anchoring multiple Guest SSIDs to the same WLC

Richard Atkin — Sun, 04 Jul 2021 02:27:55 GMT

Hi All,

I've currently got a typical 'anchored' Guest WLAN solution where several WLCs tunnel guest traffic back to an isolated WLC for WebAuth - this all works fine using a mix of 5508 / 4400, all on v7.0.98.0 code.

The question is, can I add a second Guest SSID to the estate and anchor it back to the same Guest Anchor WLC that I'm already using?

I can't find anything to say it won't work and have found this that says it should, but none of this is very concrete... Does anybody know of any better references and/or have you done this in the wild?

https://supportforums.cisco.com/message/1276785

Cheers,

Richard

Re: Anchoring multiple Guest SSIDs to the same WLC

Nicolas Darchis — Thu, 25 Nov 2010 07:15:50 GMT

Hi,

yes it's totally ok.

On the foreign, just create a second WLAN and anchor it to the other WLC. On the anchor, create the same second WLAN that you anchor to itself ...

Nothing speciali in order to configure it.

Nicolas

===

Don't forget to rate answers that you find useful

topic Anchoring multiple Guest SSIDs to the same WLC in Wireless

Anchoring multiple Guest SSIDs to the same WLC

Re: Anchoring multiple Guest SSIDs to the same WLC