topic Re: WLC LAP seconds in Wireless

WLC LAP seconds

ricardorojas123 — Sun, 04 Jul 2021 01:01:20 GMT

I would like to do this:

For example, if the access points do not recive the Wireless LAn Controller response in 30 seconds, the access point will be registered in the secondary WLC. I would like to increase this number of seconds (in the example 30 seconds change to 50 seconds for exanple). How can I do?

Wireless Lan Controller : 4400

Version IOS : 5

Re: WLC LAP seconds

ricardorojas123 — Mon, 07 Sep 2009 15:08:12 GMT

This parameter is called heartbeat. AP heartbeat is set to 30 seconds by default.

But How I can changed to 50 seconds for example ??

Re: WLC LAP seconds

Leo Laohoo — Mon, 07 Sep 2009 22:14:10 GMT

You can configure the fast heartbeat timer only for access points in local and hybrid-REAP modes.

Using the GUI to Configure Backup Controllers

http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51lwap.html#wp1334437

Hope this helps.

Please rate when applicable or helpful.