topic Re: Access point Cisco 1562 in Wireless

Access point Cisco 1562

fsolis001 — Mon, 05 Jul 2021 16:47:30 GMT

Tengo el siguiente problema con un punto de acceso Cisco 1562, el cual no me deja entrar en su configuración y me aparece el siguiente error, está leyendo y está apareciendo es un problema del poe, en la ficha técnica del diseño del modelo interior AIR-PWRINJ6 el cual tiene que ver para configurar y nada, alguien me puede apoyar para poder resolver el problema.

saludos

[* 12/02/2018 01: 38: 50.3875] DOT11_DRV [0]: set_channel Canal establecido en 6

[* 12/02/2018 01: 38: 50.5681] Radio iniciada 0

[* 12/02/2018 01: 38: 52.0447] Radio 1 detenida

[* 12/02/2018 01: 38: 52.0571] DOT11_DRV [1]: set_channel Canal establecido en 153

[* 12/02/2018 01: 38: 52.2780] Comenzó Radio 1

[* 12/02/2018 01: 38: 52.5761] Radio detenida 0

[* 12/02/2018 01: 38: 52.5885] DOT11_DRV [0]: set_channel Canal establecido en 7

[* 12/02/2018 01: 38: 52.7787] Radio iniciada 0

[* 12/02/2018 01: 38: 54.2894] Radio 1 detenida

[* 12/02/2018 01: 38: 54.3021] DOT11_DRV [1]: set_channel Canal establecido en 157

[* 12/02/2018 01: 38: 54.5293] Comenzó Radio 1

[* 12/02/2018 01: 38: 54.7867] Radio detenida 0

[* 12/02/2018 01: 38: 54.7990] DOT11_DRV [0]: set_channel Canal establecido en 8

[* 12/02/2018 01: 38: 54.9969] Radio iniciada 0

[* 12/02/2018 01: 38: 56.5376] Radio 1 detenida

[* 12/02/2018 01: 38: 56.5501] DOT11_DRV [1]: set_channel Canal establecido en 161

[* 12/02/2018 01: 38: 56.7760] Comenzó Radio 1

[* 12/02/2018 01: 38: 57.0049] Radio detenida 0

[* 12/02/2018 01: 38: 57.0170] DOT11_DRV [0]: set_channel Canal establecido en 9

[* 12/02/2018 01: 38: 57.2125] Radio iniciada 0

[* 12/02/2018 01: 38: 58.7844] Radio 1 detenida

[* 12/02/2018 01: 38: 58.7972] DOT11_DRV [1]: set_channel Canal establecido en 165

[* 12/02/2018 01: 38: 58.9967] Comenzó Radio 1

[* 12/02/2018 01: 38: 59.2205] Radio detenida 0

[* 12/02/2018 01: 38: 59.2331] DOT11_DRV [0]: set_channel Canal establecido en 10

[* 12/02/2018 01: 38: 59.4292] Radio iniciada 0

[* 12/02/2018 01: 39: 01.0081] Radio 1 detenida

[* 12/02/2018 01: 39: 01.0210] DOT11_DRV [1]: set_channel Canal establecido en 56

[* 12/02/2018 01: 39: 01.2298] Comenzó Radio 1

Re: Access point Cisco 1562

Leo Laohoo — Sat, 02 Feb 2019 04:49:14 GMT

DISCLAIMER: I don't speak Spanish.
Console into the AP and enter the command "capwap ap mode local".

Re: Access point Cisco 1562

fsolis001 — Sat, 02 Feb 2019 20:10:02 GMT

Thank you for your attention

according to your experience, what could be the cause of the problem? I assumed it was the power injector, which only gave 30 w and now I just bought a 60w and the following appears.

12/02/2018 01:41:21.9398] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*12/02/2018 01:41:26.0455] Waiting for uplink IPv4 configuration
[*12/02/2018 01:41:31.0466] Waiting for uplink IPv4 configuration

Password: ng to your experience, what could be the cause of the problem? I ass
Error: Maximum input length exceeded
ing appears.
Password: [*12/02/2018 01:41:36.0477] Waiting for uplink IPv4 configuration
[*12/02/2018 01:41:37.0478] Resetting wired0 and[12/02/2018 01:41:37.0800] wired0: stopped
restart DHCP client
[12/02/2018 01:41:39.1600] wired0 emac 1: link up
[12/02/2018 01:41:39.2100] wired0: link up
[12/02/2018 01:41:39.2600] wired0: started
[*12/02/2018 01:41:39.3123] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*12/02/2018 01:41:43.4179] Waiting for uplink IPv4 configuration
[*12/02/2018 01:41:48.4191] Waiting for uplink IPv4 configuration
[*12/02/2018 01:41:53.4202] Waiting for uplink IPv4 configuration
[*12/02/2018 01:41:54.4204] Resetting wired0 and[12/02/2018 01:41:54.4500] wired0: stopped
restart DHCP client
[12/02/2018 01:41:56.5400] wired0 emac 1: link up
[12/02/2018 01:41:56.5900] wired0: link up
[12/02/2018 01:41:56.6300] wired0: started
[*12/02/2018 01:41:56.6881] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*12/02/2018 01:42:00.7939] Waiting for uplink IPv4 configuration
[*12/02/2018 01:42:05.7949] Waiting for uplink IPv4 configuration
[*12/02/2018 01:42:10.7959] Waiting for uplink IPv4 configuration
[*12/02/2018 01:42:11.7961] Resetting wired0 and[12/02/2018 01:42:11.8300] wired0: stopped
restart DHCP client
[12/02/2018 01:42:13.9100] wired0 emac 1: link up
[12/02/2018 01:42:13.9600] wired0: link up
[12/02/2018 01:42:14.0100] wired0: started
[*12/02/2018 01:42:14.0639] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*12/02/2018 01:42:18.1698] Waiting for uplink IPv4 configuration
[*12/02/2018 01:42:23.1708] Waiting for uplink IPv4 configuration

Re: Access point Cisco 1562

Leo Laohoo — Sat, 02 Feb 2019 22:16:42 GMT

@fsolis001 wrote:

Resetting wired0 and[12/02/2018 01:42:11.8300] wired0: stopped restart DHCP client

AP is not getting an IP address. AP is connected to an injector. So what is the injector connected to? Is DHCP Option 43 enabled?

Re: Access point Cisco 1562

fsolis001 — Mon, 04 Feb 2019 17:07:31 GMT

The issue of the power injector has been solved, but I see that the ap is not autonomous and comes in mesh mode, can I do it autonomously to configure it in a normal way or forcefully require a controller?

Re: Access point Cisco 1562

Leo Laohoo — Tue, 05 Feb 2019 06:15:57 GMT

@fsolis001 wrote:

the ap is not autonomous and comes in mesh mode

Console into the AP and enter the following command: capwap ap mode local

Re: Access point Cisco 1562

Haydn Andrews — Tue, 05 Feb 2019 08:51:47 GMT

As the AP is in Mesh mode to convert to local mode you need to first authorized to register to the controller.

You need to add the AP Mac address in either the AP in Policies list or the MAC filtering on the controller.

Security > AAA > AP Policies

Click ADD and enter the Ethernet MAC Address of the AP, select MIC as the certificate type.

Reboot the AP and it will join the WLC (As long as normal discovery methods are configured like DHCP option 43)

Once the AP joins the controller, change the mode to local (will reboot again)

WIRELESS > Access Points > All APs then click an AP name to navigate to the AP Details page

Before switching an AP from Local to Bridge mode ensure that the AP has an image with a full radio support (…-k9w8-…) so that it can support Radios and that the AP MAC address has been added to the WLC.