topic Your welcome. in Wireless

Access Point - Factory Reset

ivadministrator — Mon, 05 Jul 2021 10:24:12 GMT

I am trying to Factory Reset an AirCap3502E, and I cannot find the instructions for that - or documentation for the basic configuration of that device. Can anyone help?

Hello ivadministrator,To

Charles Hill — Sat, 13 Jun 2015 00:01:35 GMT

Hello ivadministrator,

To reset a AirCap3502E, hold down the mode button for 30 seconds at power on.

Link below points to a Getting started for a 3500 series access point.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/3500/quick/guide/ap3500getstart.html#41347

Hope this helps,

Please rate helpful posts.

Thanks.

Thank you Charles!

ivadministrator — Sat, 13 Jun 2015 00:15:55 GMT

Thank you Charles!

Your welcome.

Charles Hill — Sat, 13 Jun 2015 00:42:51 GMT

Your welcome.

Re: Access Point - Factory Reset

m.rana.ku — Fri, 08 Jan 2021 15:13:02 GMT

Hi,

Three easy steps to Reset Cisco AP using MODE button:

https://www.youtube.com/channel/UCmZZ2BNGXQH1HPS3uIVnr7A?sub_confirmation=1

https://youtu.be/eGCnTWBEpp8

Step 1: Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the access point.
Step 2: Press and hold the MODE button while you reconnect power to the access point.
Step 3: Hold the MODE button until the Status LED turns amber (approximately 10 to 12 seconds), and release the Button. All access point settings return to factory defaults.

Re: Access Point - Factory Reset

haribasdas — Mon, 13 Feb 2023 13:29:18 GMT

problem Csico AP CAP1702I-D-K9 ios upgrade with register velu change

Re: Access Point - Factory Reset

haribasdas — Mon, 13 Feb 2023 13:38:04 GMT

How to change register value CISCO AIR-CAP1702I-D-K9 AP