topic Thank you. in Wireless

Cisco Aironet 1850 Series Access Points - AVAILABILITY for Purchase

michaelgitonga — Mon, 05 Jul 2021 10:21:53 GMT

Hi,

Question to the Cisco teams.

When are the new Cisco Aironet 1850 Series Access Points available for purchase. I can't find them on Cisco CCW
Are they backward compatible with IEEE 802.11a/b/g/n??

Hi Michael,1. I can't tell

Freerk Terpstra — Mon, 08 Jun 2015 17:48:47 GMT

Hi Michael,

1. I can't tell you this, maybe your VAR or Cisco AM can give you an estimate. However, I can tell you from my own experience that if you want an stable solution which is also fast delivered you can better go with the 2700 or 3700 AP's. Both are positioned higher than the 1850 anyways.
2. All 802.11AC access-points should be backwords compatible with the older standards. But if you want to experience more performance you should get rid of at least the 802.11b clients and also disable those data-rates.

Here is the datasheet if that

Rasika Nayanajith — Tue, 09 Jun 2015 05:59:27 GMT

Here is the datasheet if that helps

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1850-series-access-points/datasheet-c78-734256.pdf

HTH

Rasika

Thank you.

michaelgitonga — Fri, 12 Jun 2015 08:49:53 GMT

Thank you.

michaelgitonga — Fri, 12 Jun 2015 08:50:33 GMT

Thank you.

No problem. You help others

Freerk Terpstra — Fri, 12 Jun 2015 10:25:39 GMT

No problem. You help others with selecting the reply as "correct Answer", thanks!

Cisco's practice is 4 weeks

Leo Laohoo — Sat, 13 Jun 2015 05:40:46 GMT

Cisco's practice is 4 weeks after announcement and it will be FCS (first customer shipment). If you have access to CCW then this SKU will be made available in the next few days but it will be classified as NPH (new product, HOLD). This means you can order but you won't get a definite shipping out date or availability details.

Besides, why hurry? No one (unless you're one of the beta testers) can use the 1850 in production yet because the code to support the 1850 is not yet available. It will be made available a few days (24- or 48 hours) before the 1850 FCS date.

Thank you.

michaelgitonga — Sat, 13 Jun 2015 07:58:41 GMT

Thank you.

I'm one of those beta testers

Scott Fella — Sat, 13 Jun 2015 17:41:06 GMT

The info I can provide is that the 1850 is a 1k series AP. So this is a product to really replace the 1702, 1602 access points. This AP is Cisco's 1st Wave 2 AP but only supports 80mhz channel width. There is limitations also right now as it is only supported in the beta v8.1, so that means when it ships (FCS), you will have to have v8.1MR2 on your WLC's. The number of modes are limited to for now on the 1850 to local and monitor mode.

Hope this helps.

-Scott

Scott,Thanks. I will go for

michaelgitonga — Sat, 13 Jun 2015 17:41:07 GMT

Scott,

Thanks. I will go for the Cisco 3700e AP. Also. One thing with the 3700 is that if I put say, the Wireless Security & Spectrum Intelligence Module, I can't put a WAVE 2 module in future.

That is correct. Only one

Scott Fella — Sat, 13 Jun 2015 17:44:18 GMT

That is correct. Only one module can be used.

-Scott

Hi Scott, where have you

andyirving — Wed, 17 Jun 2015 14:56:03 GMT

Hi Scott, where have you heard the WLC will be built in, my understanding was the Mobility Express bundle simply included a CT2504 in the BoM on CCW?

If it did include the WLC it would be competing with Meraki (as well as Aruba IAP) so I would be surprised if Cisco went down that route.