topic monitor capwap access points in Wireless

monitor capwap access points

hubert_plissonneau — Mon, 05 Jul 2021 09:55:39 GMT

Hello ,

After migrating from standalone access points to capwap access points ( with wireless lan controller / Cisco Prime ) , a lot of people are wondering how to monitor their AP's by receiving traps from the controllers .

I am searching for trap list that should be accepted by a monitoring product ( ie nagios ) in order to monitor the status of the access points .

Where can i find this info ?

Thank you in advance for your help ;

Rgds.

Hubert.

Since all AP managed by WLC,

Rasika Nayanajith — Wed, 15 Apr 2015 07:56:09 GMT

Since all AP managed by WLC, all information available from WLC, no need to directly get this information from AP directly.

If you want you can configure AP & WLC syslog to export to a syslog server & then analyse them. Below post may give some idea

http://mrncciew.com/2014/09/19/wlc-syslog-analysis/

http://mrncciew.com/2013/02/06/syslog-msg-log-in-wlc/

HTH

Rasika

*** Pls rate all useful responses ****