topic Re: Wireless Client to Wireless Client access not working. in Wireless

Wireless Client to Wireless Client access not working.

rcancel — Sun, 04 Jul 2021 02:15:28 GMT

I have a integrated Cisco Wism on my 6506. I'm running EIGRP. All networks see the wifi clients. Everything works great, except for sharing printers or pinging. I can ping from one wireless client to another, as long as they are not on the same site (i.e. LA to NY). If I try to ping a wireless client from a local wireless client (i.e. LA to LA), everything times out. It seems that if I access a wireless client from a wireless client within the same network, they don't see each other. However, wireless clients from one site can access wireless clients at another.

Any hints would be greatly appreciated!!

Thanks!

Reinaldo

Re: Wireless Client to Wireless Client access not working.

Leo Laohoo — Wed, 06 Oct 2010 22:01:02 GMT

Go to WLAN > WLAN ID of your choice > Advanced Tab > and enable "P2P Blocking Action".

Re: Wireless Client to Wireless Client access not working.

rcancel — Wed, 06 Oct 2010 22:15:51 GMT

Thank you so very much!! It worked!!!

Re: Wireless Client to Wireless Client access not working.

Leo Laohoo — Thu, 07 Oct 2010 03:11:38 GMT

Thank you very much for the ratings.