topic Re: Time-based access controls in Wireless

Time-based access controls

cherring — Sun, 04 Jul 2021 00:09:45 GMT

Hello all,

Is there a time-based access control that can be configured for a 4.2 WCS+WiSM setup either in the WCS or controller? Or am I limited to the ACLs for my Wireless VLAN on the switch. Ultimately, I would like to be able to configure certain APs to accept/deny connections at specific times of the day. Any suggestions would be appreciated. Thank you in advance for your time and help.

Charles

Re: Time-based access controls

amritpatek — Fri, 20 Feb 2009 03:26:22 GMT

Currently, IP and IPX extended access lists are the only functions that can use time ranges. The time range allows the network administrator to define when the permit or deny statements in the access list are in effect. Prior to this feature, access list statements were always in effect once they were applied. Both named or numbered access lists can reference a time range.

For the further description following URL for the Time-Based Access Lists will help you.

http://www.cisco.com/en/US/docs/ios/12_0t/12_0t1/feature/guide/timerang.html#wp10236

I hope it may help you.

Re: Time-based access controls

cherring — Fri, 20 Feb 2009 13:27:44 GMT

Yes, thank you. This is helpful, and confirmed my suspicion.