https://community.cisco.com/t5/wireless/quot-auto-rf-quot-in-wlc-software-version-8-3-148/m-p/3740277#M5387 <P>&nbsp;</P> <P>Cisco's Wireless Configuration Analyzer is telling me this:</P> <P>"<SPAN>Security: It is recommended to monitor all channels for rogue detection. Band(s): 2.4GHz,5GHz".</SPAN></P> <P><SPAN>&nbsp;</SPAN></P> <P><SPAN>Cisco's document "Rogue AP Detection under Unified Wireless Networks" says to control this setting, do this:</SPAN></P> <P><SPAN>"Select Wireless &gt; 802.11a Network, then Auto RF in the right hand side as shown in the figure."</SPAN></P> <P>&nbsp;</P> <P><SPAN>This document was written for an older version of the WLC software, and I can't find a newer one. Thie "Auto RF..." button is not where the document says it is, nor can I find it anywhere. Does anyone know where to find it in version 8.x?</SPAN></P> <P>&nbsp;</P> <P><SPAN>Thanks.</SPAN></P> Mon, 05 Jul 2021 16:24:55 GMT RBenke 2021-07-05T16:24:55Z https://community.cisco.com/t5/wireless/quot-auto-rf-quot-in-wlc-software-version-8-3-148/m-p/3740277#M5387 <P>&nbsp;</P> <P>Cisco's Wireless Configuration Analyzer is telling me this:</P> <P>"<SPAN>Security: It is recommended to monitor all channels for rogue detection. Band(s): 2.4GHz,5GHz".</SPAN></P> <P><SPAN>&nbsp;</SPAN></P> <P><SPAN>Cisco's document "Rogue AP Detection under Unified Wireless Networks" says to control this setting, do this:</SPAN></P> <P><SPAN>"Select Wireless &gt; 802.11a Network, then Auto RF in the right hand side as shown in the figure."</SPAN></P> <P>&nbsp;</P> <P><SPAN>This document was written for an older version of the WLC software, and I can't find a newer one. Thie "Auto RF..." button is not where the document says it is, nor can I find it anywhere. Does anyone know where to find it in version 8.x?</SPAN></P> <P>&nbsp;</P> <P><SPAN>Thanks.</SPAN></P> Mon, 05 Jul 2021 16:24:55 GMT https://community.cisco.com/t5/wireless/quot-auto-rf-quot-in-wlc-software-version-8-3-148/m-p/3740277#M5387 RBenke 2021-07-05T16:24:55Z https://community.cisco.com/t5/wireless/quot-auto-rf-quot-in-wlc-software-version-8-3-148/m-p/3742150#M5388 <P>maybe you are looking for this</P> <P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/b_cg81_chapter_011000.html#ID131" target="_blank"><SPAN>Configuring the RF Group Mode (GUI)</SPAN></A></P> Thu, 08 Nov 2018 15:07:54 GMT https://community.cisco.com/t5/wireless/quot-auto-rf-quot-in-wlc-software-version-8-3-148/m-p/3742150#M5388 pieterh 2018-11-08T15:07:54Z