https://community.cisco.com/t5/wireless/wlc-2504-trustsec-support/m-p/3706601#M5462 <P>Hey everyone,</P> <P>We are trying to apply centralized ACL rules per user group by using ISE authentication. The problem is when we get to the wireless, the WLC does not support DACL. And from the documentation I've seen, the WLC 2504 does not support SGACL, only SXP. We are using 18xx APs but I'm guessing they have to be standalone to support SGACL. Is this right? Any suggestions on how we can do centralized policy/rules without DACL or TrustSec if this is not support?</P> <P>&nbsp;</P> <P>Thanks in advanced,</P> <P>RK</P> <P>&nbsp;</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_trustsec_deployment_guide.html" target="_blank">https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_trustsec_deployment_guide.html</A></P> Mon, 05 Jul 2021 16:11:01 GMT roger.karam1 2021-07-05T16:11:01Z https://community.cisco.com/t5/wireless/wlc-2504-trustsec-support/m-p/3706601#M5462 <P>Hey everyone,</P> <P>We are trying to apply centralized ACL rules per user group by using ISE authentication. The problem is when we get to the wireless, the WLC does not support DACL. And from the documentation I've seen, the WLC 2504 does not support SGACL, only SXP. We are using 18xx APs but I'm guessing they have to be standalone to support SGACL. Is this right? Any suggestions on how we can do centralized policy/rules without DACL or TrustSec if this is not support?</P> <P>&nbsp;</P> <P>Thanks in advanced,</P> <P>RK</P> <P>&nbsp;</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_trustsec_deployment_guide.html" target="_blank">https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_trustsec_deployment_guide.html</A></P> Mon, 05 Jul 2021 16:11:01 GMT https://community.cisco.com/t5/wireless/wlc-2504-trustsec-support/m-p/3706601#M5462 roger.karam1 2021-07-05T16:11:01Z https://community.cisco.com/t5/wireless/wlc-2504-trustsec-support/m-p/3706678#M5463 <P>I would think move onto 3504 is the best way to deal with it.&nbsp; 2504 is in EoL &amp; 8.5.x. will be the last code it supports.</P> <P>&nbsp;</P> <P>HTH</P> <P>Rasika</P> Thu, 13 Sep 2018 21:17:27 GMT https://community.cisco.com/t5/wireless/wlc-2504-trustsec-support/m-p/3706678#M5463 Rasika Nayanajith 2018-09-13T21:17:27Z