topic Re: access-list command not explained in the CLI manual in Wireless

access-list command not explained in the CLI manual

gilmo — Sun, 04 Jul 2021 15:47:08 GMT

Hi,

Cisco made the acces-list available but they did not explained it in the manual. I need to disable a filter and I don't know how since the web browser interface is not working because of the filter.

Do you know how the access-list works for the AP 1230 and how I can disable it using the CLI?

Please Cisco, include the command in the next manual release.

Thanks very much,

Re: access-list command not explained in the CLI manual

gilmo — Thu, 12 Jun 2003 18:12:08 GMT

use the following syntax:

no access-list [list number]

This will disable the access-list (filter)

Re: access-list command not explained in the CLI manual

derwin — Sun, 15 Jun 2003 10:23:21 GMT

This is not in the manual as this is the same as any other Cisco IOS device access list please see the documentation on access list under the normal IOS features for routers etc

All Cisco documentation that is for a set product will only outline IOS commands that is unique to that feature or device, all commands that are common across all devices can be found in the IOS command summary

The previous answer outline how to remove it

All IOS comands can be removed from configuration mode by preceeding the command syntax with 'no'