topic you can disable HTTPs from in Wireless

WLC 5508 web auth

aamer — Mon, 05 Jul 2021 14:31:59 GMT

Hi,

I have Cisco WLC 5508, its working with an old web auth certificate (SHA1), and i want to cancel it, and create a web auth without ssh.

how i can cancel the ssl and change the web auth from "HTTPS" to "HTTP"?

best regards

Download a new SSL cert to

Sandeep Choudhary — Wed, 16 Aug 2017 06:29:10 GMT

Download a new SSL cert to WLC and reboot the controller for the new certificate to take effect.

Security > Webauth > Certificate

Regards

Dont forget to rate helpful posts

thanks for your answer,

aamer — Wed, 16 Aug 2017 06:52:25 GMT

thanks for your answer,

so i can't remove the ssl and work with HTTP?

you can disable HTTPs from

Sandeep Choudhary — Wed, 16 Aug 2017 07:02:16 GMT

you can disable HTTPs from GUI as well.

Check the last lines of the post:

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html#anc28

Regards

Dont forget to rate helpful posts

the command to disable can't

aamer — Wed, 16 Aug 2017 07:39:37 GMT

the command to disable can't work! (config network web-auth secureweb disable)

"Incorrect usage. Use the '?' or <TAB> key to list commands."

and when i press TAB to see the command:

"(Cisco Controller) >config network web-auth

port Configures additional ports for web-auth redirection.
proxy-redirect Configures proxy redirect support for web authentication clients."

which version you are running

Sandeep Choudhary — Wed, 16 Aug 2017 08:01:12 GMT

which version you are running on WLC ?

Product Version..............

aamer — Wed, 16 Aug 2017 08:09:51 GMT

Product Version.................................. 7.0.116.0

Did you try this:

Sandeep Choudhary — Wed, 16 Aug 2017 08:12:11 GMT

Did you try this:

For earlier than WLC Release 7.2 code, you must disable HTTPS management of the WLC and leave HTTP management. However, this only allows the web management of the WLC over HTTP.

upgrade the WLC to 7.2 or higher version to disable HTTPs on webauth.

Regards

Dont forget to rate helpful posts