topic Wait for the AP to join the in Wireless

Assign the static ip address on the AP 1832

faizan.mahmood — Mon, 05 Jul 2021 13:38:03 GMT

Hi,

I have controller and the access point are on the subnet. Due to some requirement i want to statically add the access point ip address and controller ip address into the AP. Kindly suggest me the suitable commands for this.

i used the following commands.

capwap ap ip address 1.1.1.2 255.0.0.0

capwap controller 1.1.1.1

is this commands correct ?

kindly help me in that

Wait for the AP to join the

Leo Laohoo — Wed, 01 Mar 2017 20:08:47 GMT

Wait for the AP to join the controller and change the IP address using the GUI. Simple.

Hi,for controller IP address

Milos Megis — Thu, 02 Mar 2017 08:58:04 GMT

Hi,
for controller IP address it is command "capwap ap controller ip address..."

for AP IP address you have correct command.

ok Leo, what if we want to

faizan.mahmood — Thu, 02 Mar 2017 12:22:52 GMT

ok Leo, what if we want to change the access point back to dhcp mode so that it automatically discover the controller.

can you help me in that

thanks

what if we want to change the

Leo Laohoo — Thu, 02 Mar 2017 20:03:04 GMT

what if we want to change the access point back to dhcp mode so that it automatically discover the controller.

Again, use the GUI.