https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081604#M55613 <P>what software version running on your WLC ?</P> <P></P> <P>Rasika</P> Tue, 31 Jan 2017 23:16:18 GMT Rasika Nayanajith 2017-01-31T23:16:18Z https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081603#M55612 <P>If I have a WLAN set to use an interface group with two interfaces and I have it setup without flexconnect functionality. All APs are set to flex connect. Some clients on the non-flexconnect WLAN end up on the VLANs (not in the interface group) that are mapped for flexconnect configured WLANs.</P> <P>Has anyone observed this behavior? It doesn't seam to happen with an interface instead of an interface group. Any workaround for this or are interface groups&nbsp;not going to function with flexconnect APs even if the WLAN is not set to use flexconnect functionality?</P> Mon, 05 Jul 2021 13:28:48 GMT https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081603#M55612 emily00001 2021-07-05T13:28:48Z https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081604#M55613 <P>what software version running on your WLC ?</P> <P></P> <P>Rasika</P> Tue, 31 Jan 2017 23:16:18 GMT https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081604#M55613 Rasika Nayanajith 2017-01-31T23:16:18Z https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081605#M55614 <P>It's a 2504 with&nbsp; 8.3.104.61 (got it via a Cisco contact).</P> Wed, 01 Feb 2017 17:02:59 GMT https://community.cisco.com/t5/wireless/flexconnect-aps-breaks-non-flexconnect-wlan-interface-group/m-p/3081605#M55614 emily00001 2017-02-01T17:02:59Z