https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952286#M55719 <P>In the controller web interface, click on the wireless tab and on the left side select either 802.11b/g/n or 802.11a/n/ac. Next to one of the ones you want to change hover over the down arrow and select Configure. Change both RF Channel Assignment and TX Power Level Assignment from Global to Custom.</P> Mon, 12 Dec 2016 15:35:24 GMT M. Wisely 2016-12-12T15:35:24Z https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952285#M55718 <P>How can I disable DCA and TPC for selected AP's so I can do proper site survey?<BR />I have a WLC with about 100 APs connected dived over several locations in the world. For one location having about 10 AP's I need to do a site survey, so I don't want the AP power nor channels to be adjusted. How can I disable these RRM features just for these specific APs and not for the entire controller?</P> Mon, 05 Jul 2021 13:13:38 GMT https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952285#M55718 joelvanpraag 2021-07-05T13:13:38Z https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952286#M55719 <P>In the controller web interface, click on the wireless tab and on the left side select either 802.11b/g/n or 802.11a/n/ac. Next to one of the ones you want to change hover over the down arrow and select Configure. Change both RF Channel Assignment and TX Power Level Assignment from Global to Custom.</P> Mon, 12 Dec 2016 15:35:24 GMT https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952286#M55719 M. Wisely 2016-12-12T15:35:24Z https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952287#M55720 <P>One additional question related to this: what is the command for setting this through the CLI?</P> Tue, 27 Dec 2016 15:24:48 GMT https://community.cisco.com/t5/wireless/how-can-i-disable-dca-and-tpc-for-selected-ap-s-so-i-can-do/m-p/2952287#M55720 joelvanpraag 2016-12-27T15:24:48Z