topic You can check out the in Wireless

Antennas & Compatible AP

MICHAEL PAPAIKONOMOY — Mon, 05 Jul 2021 12:42:47 GMT

Hello .

My question is :

is the Antenna AIR-ANT2440NV-R Capable with the AIR-AP2802I-E-K9 ? There is any where a matrix table or file where help me to check it ?

You can check out the

Jonathan Unger — Thu, 25 Aug 2016 07:30:31 GMT

You can check out the following getting started guide for the 2800 series access points.

There is a table of supported external antennas here:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/2800/quick/guide/ap2800iegetstart.html#pgfId-67466

Unfortunately the AIR-ANT2440NV-R does not appear on this table because it does not support dual band.

However, there is a fairly comparable updated antenna which supports dual-band and can be used with the 2800 series AP (AIR-ANT2544V4M-R).

http://www.cisco.com/c/en/us/td/docs/wireless/antenna/installation/guide/ant2544v4m-r.html

***Please remember to rate helpful posts and mark answers correct if appropriate so the rest of the community can benefit.

is the Antenna AIR-ANT2440NV

Leo Laohoo — Thu, 25 Aug 2016 09:23:46 GMT

is the Antenna AIR-ANT2440NV-R Capable with the AIR-AP2802I-E-K9 ?

There is no physical way the AIR-ANT2440NV antenna can be attached to a 2802I.

Hello again and thanks for

MICHAEL PAPAIKONOMOY — Thu, 25 Aug 2016 11:43:07 GMT

Hello again and thanks for your replay.

So in other words, I can use the antenna . correctly ? I am not need dual band antenna at this time.

So in other words, I can use

Leo Laohoo — Thu, 25 Aug 2016 11:57:16 GMT

So in other words, I can use the antenna . correctly ?

The AP to the RIGHT is a 2802I. Notice the surface is smooth? There is no way to attach an external to a 2802I.

External antennas can be attached to the 2802E (LEFT).

Now, you asked the question about AIR-ANT2440NV. This particular antenna, in my humble opinion, is NOT compatible with 2802E/3802E. The antenna has THREE (3) RP-TNC cables and the 2802E/3802E have FOUR (4) RP-TNC sockets.

you have right. I gave you

MICHAEL PAPAIKONOMOY — Thu, 25 Aug 2016 13:01:44 GMT

you have right. I gave you wrong information My AP is the 2802E , so i can use an external antenna . I make a mistake and I already bought the antenna . Your opinion is to not to use..... I need just 802.11n do you think that I can use it ?

do you think that I can use

Leo Laohoo — Fri, 26 Aug 2016 05:30:12 GMT

do you think that I can use it ?

I have deleted my response due to a low rating by the OP.

Sorry , You have right , i

MICHAEL PAPAIKONOMOY — Fri, 26 Aug 2016 05:30:13 GMT

Sorry , You have right , i have to be more specific. My initial question were if the above antenna which I mention in this discus (AIR-ANT2440NV) can be usable with the 2802E. Can cisco 2802E AP be paired with this antenna (AIR-ANT2440NV) ?Does this antenna could be operational if I connect it directly to the cisco AP 2802E ? This is my question.

Now about the coverage area , is just a small external flat area with 2 fixed clients 15meters away from the antenna and one mobile user client who is going to moves around the fixed clients

Now about the coverage area ,

Leo Laohoo — Fri, 26 Aug 2016 05:33:35 GMT

Now about the coverage area , is just a small external flat area with 2 fixed clients 15meters away from the antenna and one mobile user client who is going to moves around the fixed clients

15 metres away from the AP? A 2802I is more-than-suitable to cover that distance.

Yes this is true. But I have

MICHAEL PAPAIKONOMOY — Fri, 26 Aug 2016 05:53:18 GMT

Yes this is true. But I have already purchase the AP & Antenna. I bought these because I would like to be more flexible , in case of grow.

So , the antenna would be operational with the AP 2802E although the antenna has three (3) RP-TNC cables ?

AIR-ANT2535SDW-R is suitable.

Leo Laohoo — Fri, 26 Aug 2016 06:23:56 GMT

I have deleted my response due to a low rating by the OP.

OK. Thanks for your time

MICHAEL PAPAIKONOMOY — Fri, 26 Aug 2016 06:23:57 GMT

OK. Thanks for your time