topic Hi Rasika, in Wireless

Converting universal APs to ready to use AP

Ajin Skariah — Mon, 05 Jul 2021 12:42:16 GMT

Hi,

I have AIR-AP2702E-UXK9 access points and I am unable to provision it here in Kuwait as there is no regulatory domains available for this AP in Kuwait. I opened a case with TAC and its taking too long for them to fix the issue and they haven't given any ETA. Is there any way that I can change the firmware to convert it to normal access points? If yes, how do I achieve that?. I have downloaded the ap3g2-k9w8-tar.153-3.JD firmware.

Thanks,

Ajin.

I do not think there is

Rasika Nayanajith — Tue, 23 Aug 2016 19:04:00 GMT

I do not think there is another way. Either replace the AP with another that has a regulatory domain configured at manufacturing or work with TAC

HTH

Rasika

Thanks Rasika...So you're

Ajin Skariah — Wed, 24 Aug 2016 03:31:09 GMT

Thanks Rasika...So you're saying there is no option to change the firmware of the AP to a specific regulatory domain AP?

Thanks Rasika...So you're

Rasika Nayanajith — Wed, 24 Aug 2016 06:10:56 GMT

Thanks Rasika...So you're saying there is no option to change the firmware of the AP to a specific regulatory domain AP?

Yes, that's right.

HTH

Rasika

Thank you...So I'll have to

Ajin Skariah — Wed, 24 Aug 2016 09:15:01 GMT

Thank you...So I'll have to wait for Cisco to fix the issue soon and the customer is very unhappy with the delay in the implementation...

Hi Rasika,

Ajin Skariah — Wed, 24 Aug 2016 10:31:01 GMT

Hi Rasika,

Does the AP firmware has got anything to do with the regulatory domain? Suppose somehow if I change the AP firmware, will it still be universal or provisioned?

Thanks,

Ajin.