topic Regarding problem with cisco ap in Wireless

Regarding problem with cisco ap

diwakar410 — Mon, 05 Jul 2021 12:22:34 GMT

I have cisco 1700 AP. It was previously on Controller mode. Then, i changed it to standalone mode. Now, i am experiencing various problems. 1.I can't get the GUI access of AP though i can ping the ip of the AP. 2. AP doesn't broadcast the SSID. what i noticed is the IP i set in the AP via console is shown this way: Output of dir is: Directory of flash:/ 3 -rwx 64 Mar 1 1993 04:09:59 +00:00 sensord_CSPRNG0 4 -rwx 68959 Mar 1 1993 05:37:45 +00:00 event.log 5 drwx 2496 Jan 1 1970 00:08:44 +00:00 ap3g2-k9w7-mx.153-3.JC1 38 -rwx 5 Mar 1 1993 05:34:48 +00:00 private-config 48 drwx 2112 Jan 1 1970 00:20:04 +00:00 ap3g2-k9w7-mx.153-3.JAB 39 -rwx 1048 Mar 1 1993 05:45:45 +00:00 private-multiple-fs 40 -rwx 302 Mar 1 1993 00:00:34 +00:00 env_vars

Hi Diwakar410

randyinfante21 — Wed, 06 Jul 2016 11:57:25 GMT

Hi Diwakar410

Maybe the BVI is in shutdown mode. Also in the switch configuration must same subnet of native vlan and the AP

Re: Regarding problem with cisco ap

jkilleda — Mon, 05 Mar 2018 08:25:37 GMT

Hello Diwakar,

Regarding problem with cisco ap

Add mbssid guest-mode command under the ssid configuration mode and then add mbssid command under the radio interface configuration mode.