Two Standalone APS 2702

syed baseeruddin — Mon, 05 Jul 2021 11:42:36 GMT

in our office i have to configure two standalone APS of 2702 series with one ssid

Refer the link : https:/

mohanak — Thu, 03 Mar 2016 02:30:36 GMT

Refer the link : https://supportforums.cisco.com/discussion/11034316/need-setup-aps-same-ssid

Thanks Mohanak,

syed baseeruddin — Thu, 03 Mar 2016 05:17:59 GMT

Thanks Mohanak,

Could you please post any links for the configuration guides for this two Aps of 2702

Here is the configuration

mohanak — Thu, 03 Mar 2016 05:32:59 GMT

Here is the configuration guide for autonomous AP configuration : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html#pgfId-1201529

note : that the 2 APs must be on the same subnet and their signal overlaps with each other. They should have the same security settings, same SSID but different Channel.

under radio configuration you can select channel:

Channel—The default channel setting for the wireless device radios is least congested; at startup, the wireless device scans for and selects the least-congested channel. For the most consistent performance after a site survey, however, we recommend that you assign a static channel setting for each access point.

– For the 2.4 GHz radio, the relevant options are Least-Congested, channel 1-2412, channel 2-2417, channel 3-2422, channel 4-2427, channel 5-2432, channel 6-2437, channel 7-2442, channel 8-2447, channel 9-2452, channel 10-2457, and channel 11-2462.

– For the 5 GHz radio, the relevant options are Dynamic Frequency selection, channel 36-5180, channel 40-5200, channel 44-5220, channel 48-5240, channel 149-5745, channel 153-5765, channel 157-5785, channel 161-5805, and channel 165-5825.

topic Two Standalone APS 2702 in Wireless

Two Standalone APS 2702

Refer the link : https:/

Thanks Mohanak,

Here is the configuration