Trustsec with WLC

aous.salloum — Mon, 05 Jul 2021 13:46:08 GMT

Hi ,

I have customer with 5 wireless controllers in 5 locations , there is ACLs on all the controllers and whenever need to do a change it should be done on all the controllers , is there a way to implement trustsec with STG to have all the ACLs centralised and remove them from the controllers ?

thanks in advance .

If you thinking from device

Sandeep Choudhary — Thu, 30 Mar 2017 05:40:16 GMT

If you thinking from device management perspective then its best to have prime infrastructure so that you can push one template(ex: ACL) to all WLCs in one shot.

or if you want to mitigates security risks by providing comprehensive visibility into who and what is connecting across the entire network infrastructure, and exceptional control over what and where they can go...then you must use trust-sec.

here is the guide:

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_11_universal_wlc_config.pdf

Regards

Dont forget to rate helpful posts

topic If you thinking from device in Wireless

Trustsec with WLC

If you thinking from device