topic reload capwap ap from cli in Wireless

reload capwap ap from cli

Josh Sprang — Mon, 05 Jul 2021 11:04:50 GMT

I need to reload a capwap ap from cli but I cannot figure out how to. reload command is gone. Shutting the switchport does not work cause it is plugged into a power injector. How can I reload v15.3 from cli?? It is not joined to the controller, so reload will not work from there. Thanks

Cisco IOS Software, C2600 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)

WAR572-APA123_A#?
Exec commands:
<1-99>           Session number to resume
access-enable    Create a temporary Access-List entry
access-profile   Apply user-profile to interface
access-template Create a temporary Access-List entry
capwap           capwap exec commands
cd               Change current directory
debug            Debugging functions (see also 'undebug')
dir              List files on a filesystem
disable          Turn off privileged commands
do-exec          Mode-independent "do-exec" prefix support
dot1x            IEEE 802.1X Exec Commands
eap              EAP Exec Commands
enable           Turn on privileged commands
exit             Exit from the EXEC
help             Description of the interactive help system
if-mgr           IF-MGR operations
led              LED functions
lock             Lock the terminal
logging          Handles logging operations
login            Log in as a particular user
logout           Exit from the EXEC
lwapconfig       OfficeExtend AP configurations
lwapp            lwapp exec commands
monitor          Monitoring different system events
more             Display the contents of a file
name-connection Name an existing network connection
no               Disable debugging functions
partition        Partition disk
ping             Send echo messages
pwd              Display current working directory
routing-context Routing Context
send             Send a message to other tty lines
show             Show running system information
systat           Display information about terminal lines
terminal         Set terminal line parameters
traceroute       Trace route to destination
undebug          Disable debugging functions (see also 'debug')
verify           Verify a file
where            List active connections

debug capwap console

Leo Laohoo — Mon, 12 Oct 2015 08:12:32 GMT

debug capwap console cli

reload

Leo, Thanks for the response

Josh Sprang — Mon, 12 Oct 2015 11:39:22 GMT

Leo,

Thanks for the response I do not see the console option.. I tired debug capwap client cli but that did not work. see below..

WAR572-APA123_A#debug capwap ?
am           KAM-AP debug
client       CAPWAP Client Debug Options
flexconnect CAPWAP FlexConnect Debug Options
ids          WIDS debug
mcast        CAPWAP MCAST Debug Options
mfp          CAPWAP MFP Debug Options
rm           CAPWAP RM Debug Options

WAR572-APA123_A#debug capwap clie
WAR572-APA123_A#debug capwap client ?
avc             CAPWAP Client AVC
cli             CAPWAP Client Cli Messages
config          CAPWAP Client Config Messages
detail          CAPWAP Client Detail Messages
error           CAPWAP Client Error Messages
event           CAPWAP Client Event Messages
fwd             CAPWAP Client dot11 forwarding
hexdump         CAPWAP Client Hexdump Messages
info            CAPWAP Client Info Messages
lsc             CAPWAP Client LSC Events
mgmt            CAPWAP Client dot11 mgmt
packet          CAPWAP Client Packets
payload         CAPWAP Client Payload Messages
predownload     CAPWAP Client Predownload Messages
probe           CAPWAP Client dot11 probe
qos             CAPWAP Client QoS
reassembly      CAPWAP Client Fragment Reassembly
tcp-mss-adjust CAPWAP client MSS adjust
tcp-mss-print   CAPWAP Client MSS print

WAR572-APA123_A#debug capwap client cli
CAPWAP Client CLI display debugging is on
WAR572-APA123_A#rel

Thanks for the response I do

Leo Laohoo — Mon, 12 Oct 2015 11:47:42 GMT

Thanks for the response I do not see the console option

You won't. It's a hidden command.

yep your right it worked.

Josh Sprang — Tue, 13 Oct 2015 01:16:56 GMT

yep your right it worked. Thanks

Re: debug capwap console

anjaykm1985 — Tue, 25 Feb 2020 04:19:58 GMT

Thanks, this worked!

Re: reload capwap ap from cli

robertodevis — Fri, 05 Feb 2021 15:39:46 GMT

Thanks @Leo Laohoo, this worked perfectly!