topic If you console into the AP in Wireless

AP unable to join controller

rgreville666 — Mon, 05 Jul 2021 10:44:16 GMT

I am unable to join any AP to my controller and i'm not to sure where or whats going wrong..

I have 2702i APs, a 8510 Controller running..

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.120.0
RTOS Version..................................... 8.0.120.0
Bootloader Version............................... 8.0.100.0
Emergency Image Version.......................... 8.0.100.0

I have confirmed the time is correct and configured NTP, MIC are permitted and the country code is correct. The error i'm getting isn't giving me and clue and a google is show up a blank..

Join phase statistics
- Join requests received................................... 134
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 134
- Reason for last unsuccessful join attempt................ Configuration request received from unknown AP
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Aug 12 16:15:20.056

Any help is much appreciated!

Thanks

Grev

Post the output to the

Leo Laohoo — Wed, 12 Aug 2015 22:26:55 GMT

Post the output to the following commands:

1. WLC: sh sysinfo;

2. WLC: sh time;

3. AP: sh version

I'm suspecting the APs has the wrong Regulatory Domain.

Hi Leo,

FcNongTanong — Sat, 28 Nov 2015 20:07:41 GMT

Hi Leo,

We just found issue same and please follow information below, But this just swing from Joined state and Unjoin state like flapping.

AP#sh version

Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.3(3)JA5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 15-Oct-15 08:03 by prod_rel_team

ROM: Bootstrap program is C2700 boot loader

BOOTLDR: C2700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB5m, RELEASE SOFTWARE (fc2)

CBI0321RF02AP03 uptime is 3 days, 2 hours, 4 minutes

System returned to ROM by power-on

System image file is "flash:/ap3g2-k9w8-mx.153-3.JA5/ap3g2-k9w8-xx.153-3.JA5"

Last reload reason:

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-CAP2702I-E-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.

Processor board ID FCW1927NLNC

PowerPC CPU at 800Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 8.0.121.0

1 Gigabit Ethernet interface

2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 80:E0:1D:84:--:--

Part Number : 73-15824-03

PCA Assembly Number : 000-00000-00

PCA Revision Number :

PCB Serial Number : --

Top Assembly Part Number : 068-100379-01

Top Assembly Serial Number : --

Top Revision Number : A0

Product/Model Number : AIR-CAP2702I-E-K9

Configuration register is 0xF

(Cisco Controller) >

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 8.0.121.0

RTOS Version..................................... 8.0.121.0

Bootloader Version............................... 8.0.100.0

Emergency Image Version.......................... 8.0.100.0

Build Type....................................... DATA + WPS

System Name...................................... RST3F-WLC-CISCO-01

System Location.................................. RST, FL 3, RACK -, ZONE IS-USER, SN E2K8329, MODEL Cisco 8500

System Contact...................................

System ObjectID.................................. 1.3.6.1.4.1.9.1.1615

Redundancy Mode.................................. SSO

IP Address....................................... 10.125.129.4

IPv6 Address..................................... ::

System Up Time................................... 2 days 8 hrs 20 mins 59 secs

System Timezone Location.........................

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... TH - Thailand

Operating Environment............................ Commercial (10 to 35 C)

Internal Temp Alarm Limits....................... 10 to 38 C

Internal Temperature............................. +24 C

Fan Status....................................... OK

RAID Volume Status

Drive 0.......................................... Good

Drive 1.......................................... Good

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 4

Number of Active Clients......................... 162

Burned-in MAC Address............................ 10:05:CA:BE:--:--

Power Supply 1................................... Present, OK

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 6000

System Nas-Id.................................... WLC-CISCO

WLC MIC Certificate Types........................ SHA1/SHA2

(Cisco Controller) >

(Cisco Controller) >show time

Time............................................. Sun Nov 29 03:04:24 2015

Timezone delta................................... 0:0

Timezone location................................

NTP Servers

NTP Polling Interval......................... 86400

Index NTP Key Index NTP Server NTP Msg Auth Status

------- ----------------------------------------------------------------------------------

1 0 x.x.x.x AUTH DISABLED9 03:04:11 2015

Hi,

Sandeep Choudhary — Sat, 28 Nov 2015 22:44:39 GMT

Hi,

your AP is for Europe domain.

Product/Model Number : AIR-CAP2702I-E-K9

you must use AP with -S- regulatory domain.

check this : http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html

ask you supplier to change the AP

Regards

Dont forget to rate helpful posts

Hi Sandeep,

FcNongTanong — Sat, 28 Nov 2015 22:50:37 GMT

Hi Sandeep,

Thank you for response. But on my issue was AP can join to WLC normally inthe first time. But in sometime AP will go to Not Join state and go to Joined state again by itself. In 1 day we found 1 AP change state about 30 times.

Please help us to confirm this issue related with regulatory domain.

And the issue occur in time range 09:00 to 17:00 GMT+5 only.

Cheer,

FcNong

I agree with Sandeep. The AP

Leo Laohoo — Sat, 28 Nov 2015 23:16:26 GMT

I agree with Sandeep. The AP won't join the controller because of conflicting regulatory domain.

Now, straight from the box, the AP will INITIALLY JOIN the controller for the sole purpose of downloading the full CAPWAP IOS. Once the CAPWAP IOS is loaded, because of incorrect regulatory domain, the AP will not join. This is to be expected.

If you console into the AP

Scott Fella — Sun, 29 Nov 2015 16:34:34 GMT

If you console into the AP and boot the unit up, you will see errors in regards to the regulatory domain or any other errors happening at that time. Capture the output when you reboot the AP and maybe log the output during the times you say you have issues. The output will have the information you need to troubleshoot.

-Scott

Hello All,

Star_sulaiman — Tue, 11 Apr 2017 15:42:08 GMT

Hello All,

I have the same problems rgreville666 , I will give try tomorrow from the AP consol.