https://community.cisco.com/t5/wireless/ap-flexconnect-vlan-support-management/m-p/2610709#M57295 <P>This has been an issue even back in the days. First I would see if the code your running a long with the AP model has an open bug related to that issue. Now what I have done is use a CLI command template to enable the native vlan&nbsp;along with the wlan&nbsp;to vlan mapping. &nbsp;This way I just submit the CLI template in Prime since it configured each AP which you really just need. I don't think there is any report to check that. I usually run the show ap config general &lt;ap name&gt; and then parse the data.&nbsp;</P><P>-Scott</P> Mon, 22 Dec 2014 11:43:02 GMT Scott Fella 2014-12-22T11:43:02Z https://community.cisco.com/t5/wireless/ap-flexconnect-vlan-support-management/m-p/2610708#M57294 Need to find a way to show if FlexConnect VLAN Support is enabled on multiple APs across different controllers (Prime report?) Mon, 05 Jul 2021 09:09:24 GMT https://community.cisco.com/t5/wireless/ap-flexconnect-vlan-support-management/m-p/2610708#M57294 christianludwig 2021-07-05T09:09:24Z https://community.cisco.com/t5/wireless/ap-flexconnect-vlan-support-management/m-p/2610709#M57295 <P>This has been an issue even back in the days. First I would see if the code your running a long with the AP model has an open bug related to that issue. Now what I have done is use a CLI command template to enable the native vlan&nbsp;along with the wlan&nbsp;to vlan mapping. &nbsp;This way I just submit the CLI template in Prime since it configured each AP which you really just need. I don't think there is any report to check that. I usually run the show ap config general &lt;ap name&gt; and then parse the data.&nbsp;</P><P>-Scott</P> Mon, 22 Dec 2014 11:43:02 GMT https://community.cisco.com/t5/wireless/ap-flexconnect-vlan-support-management/m-p/2610709#M57295 Scott Fella 2014-12-22T11:43:02Z