Moving AP's from the Default AP-Group using Controller CLI Interface

Mark Shuck — Mon, 05 Jul 2021 09:08:15 GMT

I´m looking for the CLI command to assign an AP to an AP-Group . So the AP's moves from the default AP-Group to the new assigned AP-Group, I can I can do this thru the GUI but would like to do this using the CLI of the controller, when I rename the AP's with a script that I write after inventorying them.

Thanks to all who have any knowledge on this CLI command.

Hi Mark, (Cisco Controller)

Sebastian Pusta — Tue, 16 Dec 2014 18:03:22 GMT

Hi Mark,

(Cisco Controller) >config ap group-name MY_GROUP MY_AP_NAME

You can find out more here:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71477-ap-group-vlans-wlc.html#c3

topic Moving AP's from the Default AP-Group using Controller CLI Interface in Wireless

Moving AP's from the Default AP-Group using Controller CLI Interface

Hi Mark, (Cisco Controller)