topic How many SSID do you have in Wireless

high utilization on AP Cisco

Muhammad Hakim — Mon, 05 Jul 2021 09:01:51 GMT

Hi Forum,

I would like to share my issue, hope you can share if you face a same issues.

I have an AP which is the Utilization Channel is higher, but Tx level is low. I assume that maybe in those channel have many AP and intefering each other. Any suggest/comment on this issues i appreciate it.

===edited====

solved by disabled low data rate regarding our issue because we implemented many AP on many user on site.

Regards,

How many SSID do you have

Leo Laohoo — Fri, 28 Nov 2014 01:34:30 GMT

How many SSID do you have currently enabled on the AP?

Hi Leo, We have 3 ssid that

Muhammad Hakim — Fri, 28 Nov 2014 01:42:38 GMT

Hi Leo,

We have 3 ssid that enabled on AP. Is it impact with the channel utilization?

Regards,

3 SSIDs should have minimal

Leo Laohoo — Fri, 28 Nov 2014 02:05:10 GMT

3 SSIDs should have minimal impact on CU. Is the AP running controller-based or autonomous IOS?

I assume we are talking about

George Stefanick — Fri, 28 Nov 2014 02:31:15 GMT

I assume we are talking about 2.4 ? What is the lowest mandatory rate set at ?

Hi, AP running with the

Muhammad Hakim — Fri, 28 Nov 2014 07:19:03 GMT

Hi,

AP running with the Controller.

Sorry what is cu that you mention?

Thanks

Hi, Yes were talking 2,5 Ghz,

Muhammad Hakim — Fri, 28 Nov 2014 07:22:51 GMT

Hi,

Yes were talking 2,5 Ghz, do you mention about 802.1 b/g/n? Yes, only this radio/freq have high utilization, 802.1 a/n doesnt.

Thanks

dear Forum, any help please..

Muhammad Hakim — Fri, 05 Dec 2014 11:19:02 GMT

dear Forum,

any help please...

Please check the below

Ravi Singh — Fri, 05 Dec 2014 17:43:59 GMT

Please check the below link

https://supportforums.cisco.com/discussion/11632696/high-bg-channel-utilization