Mesh 2602i AP - One-way Neighbor

Steve Berglund — Mon, 05 Jul 2021 08:12:55 GMT

Hi everyone

I have two test AP's set up as RAP and MAP.

MAP shows the correct neighbor info, but RAP does not show anything.

I try to do a link test on the MAP, but it displays the following error -

ERROR: Cannot get stats from destination AP
Unable to perform Link Test

Backhaul 5GHz radios are on the same 40MHz channels - 64,60

Both radio roles show Downlink Access

Range - root to mesh is at default 12000

Both have the same Bridge Group name

I must be missing something somewhere. Any ideas?

Thanks

I should mention the

Steve Berglund — Fri, 11 Jul 2014 01:05:48 GMT

I should mention the controller version is 7.6.120.