After "Clear stats on all AP" joined APs are not appearing

vinod rathore — Mon, 05 Jul 2021 07:57:44 GMT

Hi,

Few days back i edited access-points name and saved configuration.

After that when i look at Monitor>Statistics>AP join

Few of APs name are not correct they are still appearing with old name where under wireless > All APs

showing all name correctly.

I tried Monitor>Statistics>AP join> clear stats on all APs

thereafter all APs gone form the list and still not visible however those APs are running fine and no issue at all but why they're not appearing back there ?

HI Vinod,Monitor>Statistics

Sandeep Choudhary — Thu, 12 Jun 2014 09:32:09 GMT

HI Vinod,

Monitor>Statistics>AP Join

Here you will just see the summary of all access points that joined or attempted to join to the controller.

Once you clear this you will not having any stat about earlier joined attemps.

If any later new AP will try to join then only you can see the new stats here.

Hope it helps.

Regards

Dont forget to rate helpful posts

topic After "Clear stats on all AP" joined APs are not appearing in Wireless

After "Clear stats on all AP" joined APs are not appearing

HI Vinod,Monitor>Statistics