Cisco Autonomous AP not pingable from the core switch

Mohamed Sayed — Mon, 05 Jul 2021 07:48:32 GMT

hi all,

I have cisco AP 1121 autonomous connected to my core switch, I can see it on the cdp neighbors with its IP and they are running but i cannot ping them or telnet them?

the port that connected on the AP is trunk.

what may be the problem ?? please advice

Post the config of your 1121

Leo Laohoo — Sun, 11 May 2014 12:15:12 GMT

Post the config of your 1121 and the interface config of the switch.

thanks alot for your reply :)

Mohamed Sayed — Sun, 11 May 2014 15:19:09 GMT

thanks alot for your reply 🙂

I will go to the customer and post these output.

hi Leo Laohoothese are the

Mohamed Sayed — Mon, 12 May 2014 22:28:05 GMT

hi Leo Laohoo

these are the interface configuration:

!
interface FastEthernet0/14
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,133,144,1002-1005
switchport mode trunk
spanning-tree portfast
!

the configuration of AP:

Building configuration...

Current configuration : 2923 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Room-547
!
no logging console
enable secret 5 $1$8vkK$fKUJT.m.dsDa/yp/bErUu1
!
username Cisco password 7 13261E010803
ip subnet-zero
!
no aaa new-model
dot11 vlan-name management vlan 1
dot11 vlan-name wireless_data vlan 133
dot11 vlan-name wireless_voice vlan 144
!
dot11 ssid Guest_Data1
vlan 120
authentication open
!
dot11 ssid Guest_Data2
vlan 122
authentication open
!
dot11 ssid Holiday Inn
vlan 133
authentication open
guest-mode
!
dot11 ssid Voice
vlan 144
authentication open
!
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid Holiday Inn
!
ssid Voice
!
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
channel 2462
station-role root
world-mode dot11d country FR both
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.133
encapsulation dot1Q 133
no ip route-cache
bridge-group 133
bridge-group 133 block-unknown-source
no bridge-group 133 source-learning
no bridge-group 133 unicast-flooding
bridge-group 133 spanning-disabled
!
interface Dot11Radio0.144
encapsulation dot1Q 144
no ip route-cache
bridge-group 144
bridge-group 144 subscriber-loop-control
bridge-group 144 block-unknown-source
no bridge-group 144 source-learning
no bridge-group 144 unicast-flooding
bridge-group 144 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 80 in
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.133
encapsulation dot1Q 133
no ip route-cache
bridge-group 133
no bridge-group 133 source-learning
bridge-group 133 spanning-disabled
!
interface FastEthernet0.144
encapsulation dot1Q 144
no ip route-cache
bridge-group 144
no bridge-group 144 source-learning
bridge-group 144 spanning-disabled
!
interface BVI1
ip address x.x.x.x x.x.x.x.x
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
bridge 1 route ip
!
!
!
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
!
end

appreciate your support

I presume your AP BVI1 and

Leo Laohoo — Mon, 12 May 2014 23:58:34 GMT

I presume your AP BVI1 and your VLAN 1 are in the same subnet?

are they must be in the same

Mohamed Sayed — Tue, 13 May 2014 10:27:30 GMT

are they must be in the same subnet ??

According to your

Leo Laohoo — Tue, 13 May 2014 12:01:31 GMT

According to your configuration, they should. BVI1 is configured as your Management VLAN and this is tied to VLAN 1.

Bridge-Group 1 is always tied to BVI1.

Thank you for taking the time

Leo Laohoo — Sun, 18 May 2014 02:31:57 GMT

Thank you for taking the time to rate our posts.

topic Cisco Autonomous AP not pingable from the core switch in Wireless