https://community.cisco.com/t5/wireless/upgrade-ap-image-from-cisco-3850-w-integrated-wireless/m-p/2483453#M57971 <P>I have just deployed a new 3850 with the integrated wireless controller and 2 2600i APs. Before joining the APs to the controller, I upgraded them to the latest LWAPP image. It appears that they were downgraded when joining the controller the first time. Is there a way to install the latest version of LWAPP software back to the APs from the 3850 controller?</P> Mon, 05 Jul 2021 07:35:58 GMT andrew.schaefer 2021-07-05T07:35:58Z https://community.cisco.com/t5/wireless/upgrade-ap-image-from-cisco-3850-w-integrated-wireless/m-p/2483453#M57971 <P>I have just deployed a new 3850 with the integrated wireless controller and 2 2600i APs. Before joining the APs to the controller, I upgraded them to the latest LWAPP image. It appears that they were downgraded when joining the controller the first time. Is there a way to install the latest version of LWAPP software back to the APs from the 3850 controller?</P> Mon, 05 Jul 2021 07:35:58 GMT https://community.cisco.com/t5/wireless/upgrade-ap-image-from-cisco-3850-w-integrated-wireless/m-p/2483453#M57971 andrew.schaefer 2021-07-05T07:35:58Z https://community.cisco.com/t5/wireless/upgrade-ap-image-from-cisco-3850-w-integrated-wireless/m-p/2483454#M57972 <P>Hi Andrew,</P><P>LAP always download the image run on a WLC (in this case 3850). So no point upgrade LAP independantly as it will always sync with image run on the controller it joins.</P><P>In this case you can upgrade 3850 to 3.3.2 (which is the latest image as of today) if you are not already running that code</P><P>HTH</P><P>Rasika</P><P>**** Pls rate all useful resposnes ****</P> Tue, 01 Apr 2014 22:19:55 GMT https://community.cisco.com/t5/wireless/upgrade-ap-image-from-cisco-3850-w-integrated-wireless/m-p/2483454#M57972 Rasika Nayanajith 2014-04-01T22:19:55Z