topic Re: Predownloading AP Image- 1240 in Wireless

Predownloading AP Image- 1240

awatson20 — Mon, 05 Jul 2021 06:55:59 GMT

I have 2 controllers that are currently on software version 7.3. I am planning on upgrading to 7.4MR2(7.4.121) and have not performed the pre-download process before. In reading some of the restrictions, I am somewhat concerned with this.

Predownloading a 7.2 or later version of image on a Cisco Aironet 1240 access point is not supported

when upgrading from a previous controller release. If predownloading is attempted to the Cisco Aironet

1240 access point, the AP gets disconnected.

We do still have several 1240 AP's. Does this only apply with you are upgrading from a release prior to 7.2? Can someone please clarify? Thanks.

Predownloading AP Image- 1240

Scott Fella — Fri, 10 Jan 2014 03:03:16 GMT

There is not enough memory to be able to download a second image. These AP's do not support it and the only way to upgrade them is to upgrade the WLC and reboot the WLC. These will join and get the new image from the WLC.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re: Predownloading AP Image- 1240

awatson20 — Fri, 10 Jan 2014 03:37:25 GMT

Thanks. That's what I thought.

Sent from Cisco Technical Support iPhone App