topic Collecting AP Inventory from WCL in Wireless

Collecting AP Inventory from WCL

Shao-Yu Chen — Sun, 04 Jul 2021 08:06:47 GMT

I am in the process to inventory all lightweight AP from each WCL and WISM from all remote sites. Is there a command from CLI that I can use to display all lightweight APs' hostname from a controller? Or, maybe a setting from controller's web console that will help me to collect information from all APs? I am trying to obtaine hostname and IP address from each AP, and generate a EXCEL spreadsheet.

Thank you for the help

Collecting AP Inventory from WCL

Rasika Nayanajith — Fri, 18 Oct 2013 20:33:57 GMT

"show ap summary" CLI output of your controller will give you this information for all the registred APs to your controller.In GUI (Wireless -> Access point) section provide you this info.

If you have prime/WCS, you can run a report (AP Inventory) you can get this as well.

HTH

Rasika

**** Pls rate all useful responses ***

Collecting AP Inventory from WCL

Shao-Yu Chen — Mon, 04 Nov 2013 21:15:16 GMT

Thank you. This worked. I was able to do log session and turn the txt file into excel sheet.

Collecting AP Inventory from WCL

Rasika Nayanajith — Mon, 04 Nov 2013 21:17:28 GMT

Great...

tks for rating the response

Rasika

This worked great! Thanks!

daytongl1 — Fri, 15 Apr 2016 14:07:56 GMT

This worked great!

Thanks!

Re: Collecting AP Inventory from WCL

jain.manish94 — Wed, 19 Feb 2025 13:45:46 GMT

Sir how to export all the ap details with IP , name and serial number of AP from 9800-40 controller.

Any way where I can get output.

Re: Collecting AP Inventory from WCL

Scott Fella — Wed, 19 Feb 2025 16:22:06 GMT

I responded to you on this thread you create also:
https://community.cisco.com/t5/wireless/cisco-wlc-9800-40/td-p/5262479