FlexConnect AP doesn´t keep custom power level after reboot

Alejandro.Angon — Sun, 04 Jul 2021 07:40:42 GMT

Hi,

I have realized that when the AP reboot, it doesn´t keep the custom power level that I assigned, this issue doesn´t happend if the AP is in local mode, when the AP is in local mode it keeps the custom power level assignment after reboot, I have a WLC 5508 with 7.4.100.0 software version and APs AIR-CAP3602I-N-K9, I will be greatful if someone knows how to fix this problem

thanks a lot.

FlexConnect AP doesn´t keep custom power level after reboot

Erwin Salazar — Mon, 19 Aug 2013 21:40:13 GMT

Alejandro,

You are hitting a known caveat:

CSCug79785

3600 AP does not retain static power configuration after 2nd reboot

Symptom: Statically assigned power level on 3600 is not retained after 2 reboots. Conditions: Manual power configuration on AP Workaround: Manually set the power level again.

This is resolved in the latest releease 7.4.110.0.

Cheers,
Erwin

______________________________________

How helpful was I? Don't forget to rate me when you have the chance!

topic FlexConnect AP doesn´t keep custom power level after reboot in Wireless

FlexConnect AP doesn´t keep custom power level after reboot

FlexConnect AP doesn´t keep custom power level after reboot