topic Re: AP 1142 Rapidly cycling through blue, green, and red in Wireless https://community.cisco.com/t5/wireless/ap-1142-rapidly-cycling-through-blue-green-and-red/m-p/2152237#M59371 <HTML><HEAD></HEAD><BODY><P>Console into the AP and see what's going on. The output will tell you what is happening. If you can't determine the issues from the output, please attach it on this thread. Makes sure you get the whole process from boot up.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Thu, 21 Feb 2013 12:33:53 GMT Scott Fella 2013-02-21T12:33:53Z AP 1142 Rapidly cycling through blue, green, and red https://community.cisco.com/t5/wireless/ap-1142-rapidly-cycling-through-blue-green-and-red/m-p/2152236#M59370 <P>Hello</P><P></P><P>After the upgrade of the WLC 5508 to version 7.4 the 1142 access-points LED blinking rapidly cycling through blue, green, and red. I found the followinung information to this behavior: "Access point location command invoked"</P><P></P><P>The configuration didn't change. What exactly means that? How can I switch this function?</P><P></P><P>regards</P><P>Pascal</P> Sun, 04 Jul 2021 06:35:11 GMT https://community.cisco.com/t5/wireless/ap-1142-rapidly-cycling-through-blue-green-and-red/m-p/2152236#M59370 plingg 2021-07-04T06:35:11Z Re: AP 1142 Rapidly cycling through blue, green, and red https://community.cisco.com/t5/wireless/ap-1142-rapidly-cycling-through-blue-green-and-red/m-p/2152237#M59371 <HTML><HEAD></HEAD><BODY><P>Console into the AP and see what's going on. The output will tell you what is happening. If you can't determine the issues from the output, please attach it on this thread. Makes sure you get the whole process from boot up.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Thu, 21 Feb 2013 12:33:53 GMT https://community.cisco.com/t5/wireless/ap-1142-rapidly-cycling-through-blue-green-and-red/m-p/2152237#M59371 Scott Fella 2013-02-21T12:33:53Z