topic Re: AP EAP-FAST Authentication in Wireless

AP EAP-FAST Authentication

dm2020 — Mon, 05 Jul 2021 18:42:16 GMT

Hi All,

I wanted to check how other do this in their networks.

We are setting up a new wireless network and need to authenticated the APs as they are connected to the network using EAP-FAST. The network has been configured in closed mode using ISE.

The EAP-FAST settings will be applied to the WLCs so the question is how do we allow the APs to reach the WLCs in the first place to be able to retrieve the EAP-FAST setting/credentials? Do we need to seed the APs first on an open port or is there a better way of doing this?

Re: AP EAP-FAST Authentication

Sandeep Choudhary — Thu, 13 Feb 2020 10:46:31 GMT

Check this post ..it may help :

https://www.ipstorming.com/cisco-ise-802-1x-ap-authentication/

https://community.cisco.com/t5/policy-and-access/wireless-ap-authentication-using-an-ise-as-a-aaa-server/td-p/2935255

Regards

Dont forget to rate helpful posts

Re: AP EAP-FAST Authentication

Muhammad Awais Khan — Thu, 13 Feb 2020 10:51:02 GMT

Removed my post 🙂 just realized a good post shared by fellow mentor with good example 🙂