topic Re: VLAN Select (Interface groups) and Outdoor AP 1552 in Wireless

VLAN Select (Interface groups) and Outdoor AP 1552

Johannes Luther — Sun, 04 Jul 2021 05:19:38 GMT

Hi board,

I'm just reading the 7.2 release configuration guide and found this:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_ports_interfaces.html#wp1384874

Chapter VLAN Select - "Guidelines and Limitations"

The following lightweight access points are supported: Cisco Aironet 1120, 1230, 1130, 1040, 1140, 1240, 1250, 1260, 3500, 1522/1524 Access Points, and 800 Series access points

Does anybody know if the 1552 outdoor AP (local mode) is supported with VLAN select? It's not listed in the config guide (as well as the 3600). I surely hope so 🙂

Re: VLAN Select (Interface groups) and Outdoor AP 1552

Scott Fella — Wed, 20 Jun 2012 15:26:28 GMT

As long as the 1552 is in local mode, it has the same features as the other AP's listed and vlan select is one of them. If you change the role to bridge, then no.

Sent from Cisco Technical Support iPhone App

VLAN Select (Interface groups) and Outdoor AP 1552

Johannes Luther — Wed, 20 Jun 2012 15:28:37 GMT

Thanks a lot! By the way - the answer was pretty fast (2 minutes after posting the question).

--> Maximum respect 🙂

Re: VLAN Select (Interface groups) and Outdoor AP 1552

Scott Fella — Wed, 20 Jun 2012 16:03:49 GMT

Haha... This is what great about this forum.

Sent from Cisco Technical Support iPhone App

VLAN Select (Interface groups) and Outdoor AP 1552

Saravanan Lakshmanan — Wed, 20 Jun 2012 23:52:10 GMT

changing the role to bridge may still have the interfacegroup working on G radio for wireless clients and A radio if client access for backhaul is enabled.