https://community.cisco.com/t5/wireless/configuring-high-availability-between-a-2504-and-4404-wlc/m-p/2677242#M6120 <P>Hi All,</P><P>&nbsp;</P><P>I wanted to know is it possible to configure fail over between a 2504 and 4404 WLC that have IP address in different subnet ranges.</P><P>&nbsp;</P><P>Thank you</P> Mon, 05 Jul 2021 10:25:48 GMT csutechops 2021-07-05T10:25:48Z https://community.cisco.com/t5/wireless/configuring-high-availability-between-a-2504-and-4404-wlc/m-p/2677242#M6120 <P>Hi All,</P><P>&nbsp;</P><P>I wanted to know is it possible to configure fail over between a 2504 and 4404 WLC that have IP address in different subnet ranges.</P><P>&nbsp;</P><P>Thank you</P> Mon, 05 Jul 2021 10:25:48 GMT https://community.cisco.com/t5/wireless/configuring-high-availability-between-a-2504-and-4404-wlc/m-p/2677242#M6120 csutechops 2021-07-05T10:25:48Z https://community.cisco.com/t5/wireless/configuring-high-availability-between-a-2504-and-4404-wlc/m-p/2677243#M6121 <P>If you mean Primary, Secondary, Tertiary controllers, then yes. &nbsp;It's can be done.&nbsp;</P><P>&nbsp;</P><P>If you mean by AP SSO then no.</P> Thu, 18 Jun 2015 03:54:01 GMT https://community.cisco.com/t5/wireless/configuring-high-availability-between-a-2504-and-4404-wlc/m-p/2677243#M6121 Leo Laohoo 2015-06-18T03:54:01Z