topic Re: Config 1242 ap in Wireless

Config 1242 ap

Gregory55 — Sun, 04 Jul 2021 01:52:32 GMT

I have a config file and need to copy it to a 1242ag IOS12.4, using CLI consoled into the AP it does not copy right for some reason. How do I copy the file over?

Re: Config 1242 ap

Leo Laohoo — Thu, 10 Jun 2010 22:14:32 GMT

1. Do you have a TFTP client?

2. The command is "copy tftp:/// flash:"

Hope this is what you are looking for.

Please don't forget to rate useful posts. Thanks.

Re: Config 1242 ap

Gregory55 — Mon, 14 Jun 2010 14:34:56 GMT

Leolaohoo

I get the conection to the ap using tftp but it gives me an error at "flash" part of the command any thoughts?

Thanks

Re: Config 1242 ap

Leo Laohoo — Mon, 14 Jun 2010 22:51:09 GMT

If your filename ends with a .BIN then use the command "copy tftp:/// flash:" (don't forget the ":" the word "flash").

If your filename ends with a .TAR then use the command "archive download-swtftp:///"

Hope this helps.