topic Re: AP 1140 in Wireless

AP 1140

k.ramalingam — Sun, 04 Jul 2021 01:04:30 GMT

Hi Experts,

I have access point AIR-LAP1141N-E-K9 and it runs on lightweight mode. Can I convert it to autonomous mode.

Thanks

Re: AP 1140

Leo Laohoo — Wed, 23 Sep 2009 03:04:43 GMT

Not yet. Cisco has not yet released the autonomous IOS. According to Cisco insiders, the IOS should be ready sometime October 2009.

Re: AP 1140

k.ramalingam — Wed, 23 Sep 2009 03:05:43 GMT

Thanks.

Re: AP 1140

Leo Laohoo — Wed, 23 Sep 2009 22:17:51 GMT

Mate,

Please rate my post if this answers your query or solves your issue.

Re: AP 1140

MARVIN SPITERI — Fri, 25 Sep 2009 10:35:25 GMT

hi there anyone has any update on the standalone IOS release date? I think it should be made more clear that this AP is only available in lightweight mode..

Re: AP 1140

Leo Laohoo — Sat, 26 Sep 2009 01:18:39 GMT

But it is.

For starters, your authorized Cisco reseller should be able to confirm this information within minutes.

Secondly, if you look at the data sheet, you'll noticed that under Software it's stated "Cisco Unified Wireless Network Software Release 5.2 or later.". Also under "Simplified Network Management" on the right, it said "Controller-based or stand-alone option*" and the "*" points to a fine line below that said something like "Standalone available in 2009".

I know, it does leave room for further improvements. But then again, if you have doubts, then your Cisco reseller should be able to get you the straight facts.

Hope this helps.