topic Re: LWAPP Ap boot problem in Wireless

LWAPP Ap boot problem

darrell.lewis — Sat, 03 Jul 2021 23:48:37 GMT

I have a 1252 Ap that was booting to LWAPP software and connecting to a 4402 controller. It suddenly stopped booting into the LWAPP code. I can reach the Ap by telnet and it seems to boot to Autonomous mode. Is there any way to start the boot into LWAPP from the command prompt? Thanks in advance.

Re: LWAPP Ap boot problem

Vinay Saini — Sun, 23 Nov 2008 16:48:10 GMT

Are you sure AP turned to Autonomous from LWAPP ... that;s weird ..

Can u run folowing cmds on AP

1. Debug lwapp client events

2. show lwapp client rcb

Just wanted to make sure it is not lwapp 🙂

Thanks

Vinay

Re: LWAPP Ap boot problem

darrell.lewis — Sun, 23 Nov 2008 19:30:58 GMT

Both commands come back as invalid. I'm also sitting at an ap# prompt.

Re: LWAPP Ap boot problem

darrell.lewis — Mon, 24 Nov 2008 02:34:56 GMT

I've figured out the problem....One of my partners reloaded the Ap with Autonomous code which explains why it was autonomous. I knew it just doesn't happen. Thanks.