https://community.cisco.com/t5/wireless/ap-1200-and-authentication/m-p/777010#M64764 <P>I have an AP configured with WDS and authenticate via a radius server. I notice that when i enable a user they are asked for a login but if they drop the connection or even shut the machine and go to log back in, they are NOT prompted for their login again. Is the AP caching that login and is there a timeout that can be set?</P> Sat, 03 Jul 2021 21:11:24 GMT d.muccillo 2021-07-03T21:11:24Z https://community.cisco.com/t5/wireless/ap-1200-and-authentication/m-p/777010#M64764 <P>I have an AP configured with WDS and authenticate via a radius server. I notice that when i enable a user they are asked for a login but if they drop the connection or even shut the machine and go to log back in, they are NOT prompted for their login again. Is the AP caching that login and is there a timeout that can be set?</P> Sat, 03 Jul 2021 21:11:24 GMT https://community.cisco.com/t5/wireless/ap-1200-and-authentication/m-p/777010#M64764 d.muccillo 2021-07-03T21:11:24Z