topic 1200 AP missing radio interface in Wireless

1200 AP missing radio interface

zahid77 — Sun, 04 Jul 2021 19:05:58 GMT

hi i have a 1200 ap and its radio interface is missing. i mean i am uanble to see its radio interface

I really need this urgently.Anybody can help me

josephbruce — Wed, 17 May 2006 12:37:30 GMT

First verify that the radio module is physically installed in the AP.

Second, what IOS are you running? Or is it VXworks?

zahid77 — Wed, 17 May 2006 13:49:34 GMT

thanks for ur reply plz find the enclosed show commands output and tell me the solution

josephbruce — Wed, 17 May 2006 15:54:18 GMT

cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 14838K/1536K bytes of memory.

Processor board ID FOC09501XL4

PowerPC405GP CPU at 196Mhz, revision number 0x0145

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

That was from an AP with the radio installed.

Your config

cisco AIR-AP1230B-E-K9 (PowerPC405GP) processor (revision A0) with 14326K/2048K bytes of memory.

Processor board ID FOC07410KFY

PowerPC405GP CPU at 196Mhz, revision number 0x00C4

Last reset from power-on

Bridging software.

1 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Yours doesn't show a radio module installed,

You need a radio module