topic AP 1200 in Wireless https://community.cisco.com/t5/wireless/ap-1200/m-p/458207#M65722 <P>Hi,</P><P>We are using AP 1200 Access Point.The PC's which are connected through this access point are unable to ping each other.We can ping Gateway &amp; also we can also use all the applications which are on the other side of the access point.</P><P>Please Help.</P><P></P><P>Regards</P> Sun, 04 Jul 2021 18:21:41 GMT parvs_cmc 2021-07-04T18:21:41Z AP 1200 https://community.cisco.com/t5/wireless/ap-1200/m-p/458207#M65722 <P>Hi,</P><P>We are using AP 1200 Access Point.The PC's which are connected through this access point are unable to ping each other.We can ping Gateway &amp; also we can also use all the applications which are on the other side of the access point.</P><P>Please Help.</P><P></P><P>Regards</P> Sun, 04 Jul 2021 18:21:41 GMT https://community.cisco.com/t5/wireless/ap-1200/m-p/458207#M65722 parvs_cmc 2021-07-04T18:21:41Z Re: AP 1200 https://community.cisco.com/t5/wireless/ap-1200/m-p/458208#M65723 <HTML><HEAD></HEAD><BODY><P>Check to see that "Public Secure Packet Forwarding" is disabled. </P><P></P><P>It can be found in the Web GUI in the "Interfaces" screen on the "Settings" Tab.</P><P></P><P>PSPF is designed to keep one wireless client from communicating to the others (wireless --&gt; wired only). The idea is to keep HotSpot clients from trying to invade the other HotSpot client's machines.</P><P></P><P>Good Luck</P><P></P><P>Scott</P><P></P></BODY></HTML> Tue, 22 Nov 2005 14:46:50 GMT https://community.cisco.com/t5/wireless/ap-1200/m-p/458208#M65723 scottmac 2005-11-22T14:46:50Z