topic Re: AP 11G in Wireless

AP 11G

mrba_2000 — Sun, 04 Jul 2021 17:42:18 GMT

Hi there,

I'm trying to setup home wireless network using AP 11G.

The problem i'm facing is my client could not get any ip address at all.

Can someone help me with the configuration on my AP??

Tks

Re: AP 11G

thisisshanky — Mon, 25 Apr 2005 03:51:00 GMT

Are you able to associate to the access point ?

Can you ping the DHCP server from the AP ?

Re: AP 11G

mrba_2000 — Mon, 25 Apr 2005 10:21:16 GMT

YEs,i'm able to associate with with my AP but the ip i get is 0.0.0.0.

I'm not able to ping to the dhcp server??

What should the configuration like??

Tks for your assistance.

Re: AP 11G

thisisshanky — Tue, 26 Apr 2005 02:51:39 GMT

You should be able to console into the AP and your BVI interface should have an address from the subnet that you have defined in the DHCP server for the clients. For the same reason you should be able to ping the DHCP server from teh console.

Do you have any WEP keys configured ? If yes, have you checked to see if you are WEP keys are configured correct.

Re: AP 11G

mrba_2000 — Tue, 26 Apr 2005 02:57:43 GMT

Hi tks,

What would be the config like??

Re: AP 11G

ashish_gupta — Wed, 25 May 2005 10:53:23 GMT

in gui you have network interfaces---ethernet--setiings -- see what is there. have u assigned any ip and gateway or is it dhcp enabled. also is your client also dhcp enabled.

one more thing u said u r doing it in home. where is the DHCP server?

reagrds

ashish gupta