topic if it is wireless bridge, you in Wireless

wireless backhaul will not allow traffic from vlan 12 and vlan 13. Native vlan is 244

iloverton — Mon, 05 Jul 2021 10:18:32 GMT

I have 2 APs in a mesh configuration WITHOUT an WLC. If a wireless client connects with the root AP all vlan traffic is passed. If a wireless client connect to a non-root AP on the native vlan 244 traffic is passed but no other vlan traffic is passed. Can someone with with getting all vlan thru the back-haul? I can manage the non-root ap on the native vlan.

if it is wireless bridge, you

Rasika Nayanajith — Thu, 28 May 2015 02:29:48 GMT

if it is wireless bridge, you should set it "Root Bridge" and "Non-Root Bridge" roles with "wireless clients" keyword on respective AP's radio interfaces. See below (do not worry about EAP configuration, just initial part of config)

http://mrncciew.com/2013/11/09/wireless-bridge-with-eap-fast/

If you want to use Root AP as simple Access Point, then you have another option where you can configure far end AP as WGB. See below

http://mrncciew.com/2013/06/16/ios-ap-wgb-with-multiple-vlan/

HTH

Rasika

*** Pls rate all useful responses ***

thank you for your answer,

iloverton — Sat, 30 May 2015 19:04:39 GMT

thank you for your answer, but the design calls for 802.11a backhaul. you are using 802.11g for backhaul and clients. We need to use 802.11a to bachual all vlans.

Thanks

if you use Radio1 interface

Rasika Nayanajith — Sat, 30 May 2015 20:53:04 GMT

if you use Radio1 interface (instead of Radio 0) then it should be 802.11a. You can use given configuration as reference and modify as you want.

HTH

Rasika

configs are attached. thanks

iloverton — Mon, 01 Jun 2015 13:02:22 GMT

configs are attached. thanks

Configs are attached in first

iloverton — Mon, 01 Jun 2015 13:03:21 GMT

Configs are attached in first post.